If you want to install computer memory, you have to check that the memory RAM module has the same configuration as the motherboard’s memory slot.

Installing the computer memory is very simple. First, align the pin of the memory module to the motherboard’s memory slot and push the memory module in. Apply even force to the memory RAM until you hear it click into place. Make sure that the clip on both sides of the socket pop into the catch.

Done!

Next, you need to place the motherboard into the computer case.

First, remove the I/O shield from the motherboard packaging and align it to the back of the case. Check that the ports on your motherboard’s back panel match the I/O shield alignment. There are small protruding dots along the side of the shield. Use the butt of the screwdriver to knock the dots into the case. This will keep the shield in place.

Second, screw the brass standoffs onto the motherboard tray or into the PC case. Place the motherboard into the case and align it to the I/O shield and to the brass standoff.

Screw it in tight.

Share and Enjoy!